Algae Stains: Cleaning Swimwear and Dock Gear

After a weekend spent boating, paddleboarding, or swimming in a freshwater lake, pond, or river, you may find your swimsuits, life jackets, rash guards, and boat lines covered in slippery green streaks and a swampy scent. Lake water contains filamentous green algae and cyanobacteria. Because swimwear and dock gear are built from technical, slick synthetics—such as nylon, polyester, and elastane—algae forms a biological slime layer that clings stubbornly to seams and wicking channels.

Quick Answer

Do not use chlorine bleach or hot water, which will destroy the spandex in swimwear. Rinse the gear immediately in cool fresh water, soak in cool water with oxygen bleach or a mild liquid detergent, gently scrub the green slime with a sponge, and air-dry in the shade.

What This Means: Biofilms on Technical Synthetics

Freshwater algae consists of microscopic aquatic plant organisms that thrive in warm, nutrient-rich water.

When you sit on a dock, step into river shallows, or scrape against a boat hull, algae cells and extracellular polymeric substances (the sticky slime algae secretes to adhere to rocks) are forced into the knit of the fabric. Swimwear and rash guards are typically made from tight knits of nylon or polyester blended with a high percentage of spandex (elastane) for stretch. While synthetic fibers do not rot from algae the way cotton can, the algae’s organic slime binds with pond silt and lake odors, settling deep into the stretch weave. If left untreated, the trapped organic matter decomposes, causing the fabric to smell rancid and gradually degrading the delicate elastic threads.

What To Do: Gentle Extraction for Stretch Fabrics

Clean algae off swimwear, rash guards, and nylon dock lines without degrading elasticity:

  1. Rinse with fresh water immediately: As soon as you exit the lake, rinse your swimwear and gear thoroughly under clean, cold tap water to flush away surface algae cells and lake silt before they dry and cake into the weave.
  2. Pre-soak in cool water with oxygen booster: Fill a sink or tub with cool or lukewarm water. Dissolve one tablespoon of color-safe oxygen bleach or a cap of gentle liquid sports detergent. Submerge the gear and let it soak for 30 to 45 minutes to break apart the organic plant biofilm.
  3. Gently massage the green residue: Use your fingertips, a soft microfiber cloth, or a very soft sponge to work the soapy water across the green stains. Focus on seams, waistbands, and high-friction areas. Avoid aggressive scrubbing, which causes pilling and snaps thin elastane filaments.
  4. Treat dock lines and heavy gear with white vinegar: For heavy nylon dock ropes, life vests, or boat covers, mix equal parts cool water and white distilled vinegar in a bucket. The mild acetic acid cuts through algae slime, dissolves mineral deposits from river water, and neutralizes stagnant lake odors.
  5. Rinse thoroughly: Rinse the gear under cold running water until every trace of detergent and plant matter is washed away and the water runs completely clear.
  6. Air-dry in the shade: Squeeze the water out gently—never wring or twist swimwear tightly, which fractures elastic fibers (see The “Do Not Wring” Symbol: Protecting chemical fabric treatments). Lay the items flat or hang them in a well-ventilated, shaded area. Avoid drying directly in the hot sun, as intense UV paired with residual lake water degrades spandex. Follow Drying Symbols for Swimwear: Salt, Chlorine, and Shade instructions.

What to Avoid

  • Never use chlorine bleach on swimwear: Chlorine bleach dissolves and degrades polyurethane-based spandex fibers, causing suits to lose their elasticity, sag, and become brittle after a single treatment.
  • Avoid hot water washing and tumble dryers: High temperatures melt synthetic microfibers, permanently damage elastic recovery, and bake lake odors into polyester yarns.
  • Do not leave damp gear sealed in a plastic bag: Storing damp lake clothes in a dark, sealed gym bag creates a greenhouse environment that lets algae and bacterial mildew multiply rapidly within hours.

When the Situation Changes: Life Jackets and Foam Gear

Life jackets, neoprene wetsuits, and foam water toys cannot be submerged in washing machines:

  • Hand-wash life vests in a utility tub using a sponge and mild detergent.
  • Rinse thoroughly with a hose and hang to dry in an airy, shaded spot until the internal flotation foam is bone dry to prevent internal mold growth.

Closing

Lake algae and river slime can leave a swampy mess on technical water gear, but harsh chemicals are not the answer. By rinsing promptly with fresh water, breaking down the plant biofilm with a gentle oxygen soak, and air-drying in the shade, you can keep your swimwear and outdoor equipment fresh, flexible, and ready for your next trip to the water.